NEW STUFF!

A six-wheeled rapid strike and scout vehicle Complete resin kit including a choice of twin linked Lascannon and Multilaser weapons. Model designed by Will Hayes, crew designed by Simon Egan.

More pictures are available here

Huge Ork Mek Boss with 2 Grot 'elpers. Complete resin kit. Model designed by Mark Bedford.

More pictures are available here

MK IV Venerable Dreadnought depicting Space Wolves iconography. Complete resin kit. Arms/Weapons sold separately. Model Designed by Simon Egan and Will Hayes.

For pictures of sample models with arms click here

You can purchase arms for the dreadnought here

MK IV Venerable Dreadnought depicting Raven Guard iconography. Complete resin kit. Arms/Weapons sold separately. Model Designed by Simon Egan and Will Hayes.

For pictures of sample models with arms click here

You can purchase arms for the dreadnought here

Imperial Armour Apocalypse II is a 112 page, full-colour hardback which provides comprehensive and updated descriptions, background and rules for using all of Forge World's recent models in your games of Warhammer 40,000 and Warhammer 40,000 Apocalypse.

The book is packed with over fifty new Apocalypse datasheets accompanied by lavish photographs, ranging from legendary units like the mighty Reaver Battle Titan to the Daemon Lord Aetaos'rau'keres -Tzeentch's Slayer of Souls. Included are new Forge World units such as the advanced Tau XV-9 Close Support Armour and the Lucius Pattern Dreadnought Drop Pod, new Apocalypse battle formations such as the savage Ork Mega-Rippa Krew and the lethal Eldar Death Web, and a few updated and unpublished datasheets as well. Also featured are an updated Apocalypse rules appendix, a unit index and some new optional Apocalypse rules and five new missions to play!

To see a larger image of the cover and information of the contents of the book click here

To see a collection of interactive page spreads click here

One of the very first models that Forge World released, back in the dim and distant past when dinosaurs walked the earth, was this large scale Imperial Space Marine, the first in our Showcase series of figurines. Standing at an impressive 6 inches/150mm tall, even now this is one of our most popular models. As you can see on the assembly instructions, the model comes in quite a number of pieces which allows for plenty of scope for modelling and personalisation. We have a limited number of the Showcase Imperial Space Marine available to order right now but we cannot predict when this set of moulds will break down, so if you really fancy getting hold of one, please order soon to avoid disappointment.

More pictures are available here

As might be expected of a creature born of pure magic and bound to the will of the Master of Sorcery, a Lord of Change is a potent spellcaster, able to summon whirling tempests of change and mutation, blasting his enemies with bolts of multi-coloured fire. Complete resin kit that stands approximately 9.5 inches (240mm) tall to the tip of the horrors in its right hand, includes 100mm square base. Sculpted by Daniel Cockersell.

More pictures are available here

The Ruined Watchtower of Amon Sûl on the hill of Weathertop, scene of the encounter between Strider and the Hobbits verses the evil Ringwraiths. This incredible terrain piece measures over 16 inches (400mm) in diameter and will make a great centre piece for your battlefield terrain table. Sculpted by Simon Egan

See more pictures of the Ruined Watchtower of Amon Sûl here

This lovely piece of terrain will only be available while stocks last, so if you want to be sure of owning a ‘Weathertop’ please don’t wait, because when they are gone we probably won’t get any more for quite some time!

All materials pertaining to the New Line theatrical productions: The Fellowship of The Ring; The Two Towers; and The Return of The King © MMVI New Line Productions,

Inc. All Rights Reserved. The Lord of The Rings, The Fellowship of The Ring, The Two Towers, The Return of The King and the names of the characters, items, events and places therein are trademarks of The Saul Zaentz Company d/b/a Tolkien Enterprises under license to New Line Productions, Inc. All Rights Reserved. Specific game rules & game strategy copyright © Games Workshop Limited 2006. All Rights Reserved. Games Workshop, the Games Workshop logo, ’Eavy Metal, Citadel and the Citadel device are either ®, TM and/or © Games Workshop Ltd 2000-2006, variably registered in the UK and other countries around the world. All Rights Reserved.

SOLD OUT

The XV-9 'Hazard' Close Support Armour is an original battlesuit design intended to act as a powerful counter-attack unit and weapons platform. Model designed by Daren Parrwood

More pictures are available here

Experimental rules for the XV-9 are available here

A horrific Daemon of Nurgle fused with a Chaos Defiler. Complete resin and plastic kit. Model designed by Sean Green and Phil Stutcinskas

More pictures are available here

A Daemon manifesting as a machine, these formidable daemon engines of the Blood God Khorne wreak havoc upon the battlefield. Complete resin kit. Model designed by Phil Stutcinskas and Simon Egan

More pictures are available here

A extremely detailed model of the Chaos Reaver Titan. Crew includes Princeps and two Moderati and three hard wired Weapon Servitors. This model stands approximately 400mm/16 inches high. Model designed by Will Hayes, crew and symbols sculpted by Simon Egan.

The Chaos Rever Titan comes with a selection of Chaos symbols to customise any of the Rever Titan Weapons available.

For more pictures of the Chaos Reaver Titan armed with the Apocolypse Missile Launcher, Gatling Blaster and Power Claw click here

WEAPONS ARMS NOT INCLUDED. THESE ARE SOLD SEPARATELY. SEE BELOW.

Apocalypse Missile Launcher for the Chaos Reaver Titan's carapace hard point. Model designed by Will Hayes and Simon Egan.

For more pictures of the Chaos Reaver Titan armed with the Apocolypse Missile Launcher, Gatling Blaster and Power Claw click here

Powerclaw for the Chaos Reaver Titan's arm hard point. Can be built as a left or right hand. Model designed by Will Hayes and Simon Egan.

For more pictures of the Chaos Reaver Titan armed with the Apocolypse Missile Launcher, Gatling Blaster and Powerclaw click here

Inferno Cannon for the Mars Pattern Warhound Titan. Model designed by Will Hayes.

Turbo Laser for the Mars Pattern Warhound Titan. Model designed by Will Hayes.

Apocalypse Missile Launcher for the Mars Pattern Reaver Titan's carapace hard point. Model designed by Will Hayes.

For more pictures of the Reaver Titan armed with the Apocolypse Missile Launcher, Gatling Blaster and Laser Blaster click here

For more pictures of the Reaver Titan armed with the Apocolypse Missile Launcher, Melta Cannon and Powerfist click here

Laser Blaster for the Mars Pattern Reaver Titan's arm hard point. Model designed by Will Hayes.

For more pictures of the Reaver Titan armed with the Apocolypse Missile Launcher, Gatling Blaster and Laser Blaster click here

Gatling Blaster for the Mars Pattern Reaver Titan's arm hard point. Model designed by Will Hayes.

For more pictures of the Reaver Titan armed with the Apocolypse Missile Launcher, Gatling Blaster and Laser Blaster click here

Melta Cannon for the Mars Pattern Reaver Titan's arm hard point. Model designed by Will Hayes.

For more pictures of the Reaver Titan armed with the Apocolypse Missile Launcher, Melta Cannon and Powerfist click here

Powerfist for the Mars Pattern Reaver Titan's arm hard point. Can be built as a left or right hand. Model designed by Will Hayes.

For more pictures of the Reaver Titan armed with the Apocolypse Missile Launcher, Melta Cannon and Powerfist click here

Complete resin kit. Huge Ork tank complete with full interior detail, Ork Kommander, three Gretchin and a Squig as crew. Model designed by Daren Parrwood, crew models designed by Mark Bedford.

For more pictures of the Ork Kil Krusha click here

Experimental Rules for the Ork Kil Krusha, Mega Dread and Grot Sponsons can be found here

Resin kit. Massive Ork Dread armed with twin Big Shootas, arms sold separately. Model designed by Phil Stutcinskas, Ork crew model designed by Mark Bedford.

For more pictures of the Ork Mega Dread with arms click here

Experimental Rules for the Ork Kil Krusha, Mega Dread and Grot Sponsons can be found here

Resin kit. Ork Kil Kannon arm and shoulder plate for the Ork Mega Dread. Can be used as the left or right arm. Model designed by Phil Stutcinskas.

For more pictures of the Ork Mega Dread with arms click here

Experimental Rules for the Ork Kil Krusha, Mega Dread and Grot Sponsons can be found here

Resin kit. Ork Rippa Klaw arm and shoulder plate for the Ork Mega Dread. Can be used as the left or right arm. Model designed by Phil Stutcinskas.

For more pictures of the Ork Mega Dread with arms click here

Experimental Rules for the Ork Kil Krusha, Mega Dread and Grot Sponsons can be found here

A pack of 2 resin Grot Sponsons to upgrade Ork Tanks. Models designed by Mark Bedford.

For more pictures of the Grot Sponsons on Ork vehicles click here

Experimental Rules for the Ork Kil Krusha, Mega Dread and Grot Sponsons can be found here

A set of all six Forge World weathering powders includes: Grey Ash, Dark Earth, Black Soot, Dark Sand, Light Earth and Orange Rust.

For a quick guide on how to use weathering powders click here

A pot of the Black Soot weathering powder. Colour may vary slightly to that shown.

For a quick guide on how to use weathering powders click here

A pot of the Orange Rust weathering powder. Colour may vary slightly to that shown.

For a quick guide on how to use weathering powders click here

A pot of the Grey Ash weathering powder. Colour may vary slightly to that shown.

For a quick guide on how to use weathering powders click here

A pot of the Dark Earth weathering powder. Colour may vary slightly to that shown.

For a quick guide on how to use weathering powders click here

A pot of the Black Soot weathering powder. Colour may vary slightly to that shown.

For a quick guide on how to use weathering powders click here

A pot of the Dark Sand weathering powder. Colour may vary slightly to that shown.

For a quick guide on how to use weathering powders click here