WARHAMMER 40K TERRAIN
Ref: TR-40K-S-087.
Quantity:
Three straight sections and two, three way corner sections. Models designed by Daren Parrwood
Ref: TR-40K-S-088p,
Gun emplacement end for the Trenches. Models designed by Daren Parrwood
Ref: TR-40K-S-089,
Large bunker emplacement with three gun positions. Models designed by Daren Parrwood
Ref: TR-40K-S-090.
Six support bars with lights for the trenches. Models designed by Daren Parrwood
Ref: TR-40K-S-092.
Equipment set including Lamp, radiatior, generator and scanner. Models designed by Daren Parrwood
Ref: TR-40K-S-091.
Two bridges, 3 scaling ladders and 3 firing steps. Models designed by Daren Parrwood
Ref: TR-40K-S-093.
Two trench ends incorporating scaling ladders Models designed by Daren Parrwood
Ref: TR-40K-S-094.
Two twin linked Heavy Stubbers and an Autocannon with three Death Korps of Kreig gunners Models designed by Daren Parrwood
Ref: TR-40K-S-085..
Tank traps are used to block the movement of enemy ground based vehicles, slowing down any armoured assault. The kit contains three sets of Tank Traps. Master Model by: Mark Bedford
Ref: TR-40K-S-086.
Ideal for representing the Sewer Rats stratagem in Cities of Death.Complete part resin model. Model designed by Mark Bedford.
Ref: TR-40K-S-083.
A pack of 6 resin Booby Traps. Ideal for the Booby Traps Stratagem in Cities of Death. Models designed by Mark Bedford
Ref: TR-40K-S-080.
Imperial Defence Platform armed with long barrelled Autocannons. This is a complete nine part resin kit. Master model by Daren Parrwood
Ref: TR-40K-S-079
Complete resin kit. Model designed by Daren Parrwood.
Ref: TR-40K-S-078
4 Interior panels including Comm Station. Each panel is approximately 50mm(2 inches) by 45mm(1.75inches). Model designed by Daren Parrwood.
Ref: TR-40K-S-077
4 Interior panels including Archivists Station. Each panel is approximately 50mm(2 inches) by 45mm(1.75inches). Model designed by Daren Parrwood.
Ref: TR-40K-S-076
2 Interior panels including large holding tank. Each panel is approximately 50mm(2 inches) by 45mm(1.75inches). This set comes with a perspex sheet to model the tank glass. Model designed by Daren Parrwood.
Ref: TR-40K-S-074
Includes: Phaeton pattern Sub-complex Gamma (TR-40K-S-073), Storage Unit Sigma (TR-40K-S-071), Fuel Dump (TR-40K-S-017) and Landing Pad Class 3 (TR-40K-S-072). Model includes full interior detail with removable roof tops. Complete resin kit, terrain board not included. Model designed by Daren Parrwood.
Ref: TR-40K-S-073
Includes: Bio-lab, Storage Room, Command Room, Comms Room, 2 Corridor Sections, Corridor Intersection, Comms Dish and Gun Tower. Model includes full interior detail with removable roof tops. Complete resin kit, terrain board not included. Model designed by Daren Parrwood.
Ref: TR-40K-S-070
Includes: Bio-lab, Storage Room and corridor section. Model includes full interior detail with removable roofs. Complete resin kit. Model designed by Daren Parrwood.
Ref: TR-40K-S-072
Landing Pad Class 3 can accomodate aircraft up to Marauder Size. Model designed by Daren Parrwood.
Ref: TR-40K-S-071
Large Phaeton Pattern storage warehouse. Model includes full interior detail with removable roof. Complete resin kit. Model designed by Daren Parrwood.
Ref: TR-40K-S-064
Imperial underground building entrance as used on the desert world of Taros and other planets in the Imperium. Complete resin kit.
Ref: TR-40K-S-065
Ref: TR-40K-S-066
Ref: TR-40K-S-067
Ref: TR-40K-S-068
Ref: TR-40K-S-069
Imperial moisture condenser. Complete resin model.
Ref: TR-40K-S-062
Crashed Tempest complete resin terrain piece. Model designed by Mark Bedford and Will Hayes
Ref: TR-40K-S-063
Wrecked Piranha complete resin terrain piece. Model designed by Mark Bedford and Daren Parrwood
Ref: TR-40K-S-061
6 Resin terrain pieces featuring mines. To see a large picture click here
Ref: IA-IAC-A-034
6 Resin anti-tank Mines and 12 resin anti-personel Mines.
Ref: TR-40K-S-060
Downed Valkyrie complete resin terrain piece. Model designed by Mark Bedford and Daren Parrwood
Ref: TR-40K-S-059
Huge Imperial Fortress wall set, features Tarantula turrets mounted on the Flying Buttresses, 2 large Autocannon turrets, armoured gateway. Details include, hooded statues, Ammunition storage areas, lifts to the battlements and ceiling mounted Autocannon gunner chairs with crew that rotate with the turret. Master model by Daren Parrwood and Simon Harris. This model will be cast to order so please allow up to 8 weeks for delivery. Tank and Figure models shown for scale purposes only.
Ref: TR-40K-S-058
Abandoned Chimera with full interior detail and sandbagged top hatch. Complete resin kit. Master model by Simon Harris.
Ref: TR-40K-S-056
Large Imperial fuel or water tank. Master model by Simon Harris. More pictures are available here
Ref: TR-40K-S-057
Heavy Bolter Tarantula in dugout. Master model by Simon Harris. More pictures are available here
Ref: TR-40K-S-055
Command post with water tank. Master model by Simon Harris. Larger pictures are available here
Ref: TR-40K-S-051
Dug out for the new Cadian Plastic Missile Launcher and crew. Model shown with crew and weapons from the Cadian Heavy Weapon Squad boxed set available separately. Master model by Simon Harris.
Ref: TR-40K-S-053
Dug out for the new Cadian Plastic Lascannon and crew. Model shown with crew and weapons from the Cadian Heavy Weapon Squad boxed set available separately. Master model by Simon Harris.
Ref: TR-40K-S-043
There are times when Imperial forces must make do with the materials at hand to contruct barricades to help fortify areas to defend and repell the enemy. Master model by Simon Harris.
Ref: TR-40K-S-044
Create your own Cityfight terrain. Using these sections of ruined buildings you can have an almost infinite selection of different ruined buildings that you can re-arrange each time you play. To see more pictures of this Cityfight terrain click here. To find out more about Cityfight click here. Master model by Simon Harris. Figure shown for scale purposes only.
Ref: TR-40K-S-045
Create your own Cityfight terrain. Using these sections of ruined buildings you can have an almost infinite selection of different ruined buildings that you can re-arrange each time you play. To see more pictures of this Cityfight terrain click here To find out more about Cityfight click here Master model by Simon Harris. Figure shown for scale purposes only.
Ref: TR-40K-S-033
Complete resin model. Master model by Simon Harris and Tony Cottrell. More pictures are available here
Ref: TR-40K-S-032
A highly detailed Earthshaker Emplacement with a platform sculpted to the base. Set includes plastic Earthshaker cannon. Master model by Simon Harris.
Ref: TR-40K-S-038
A complete multi-part resin model. The Administratum building can make a great addition to expand an Warhammer 40,000 Imperial city scape. Interior features defensive sandbag positions and various ammo crates and underground entrance. The building is 12 inches (30cm) in length and 8 inches (22cm) across. (Guardsman model shown for scale purposes only). Master Model by: Simon Harris.
Ref: TR-40K-S-031
A complete multi-part resin model. These two pieces would make great additions to a Warhammer 40,000 gaming table. (Guardsman models shown for scale purposes only). Master Model by: Simon Harris.
Ref: TR-40K-S-028
As well as providing troops protection this pillbox mount two heavy bolters . This is a complete multi-part resin kit. Master model by Simon Harris.
Ref: TR-40K-S-026
The Concrete Pillbox provides the Imperium with a small strong point for perimeter defense. These small bunkers offer troops a measure of protection against enemy firepower. This is a complete multi-part resin kit. Master model by Simon Harris.
Ref: TR-40K-S-025.
Spore chimneys pollute the planets atmosphere by releasing billions of spores which are absorbed by the local flora and fauna with devastating results. Imperial fire teams have learned that shooting these structures can cause a large spontaneous release of spores into the air. The full rules for using the Spore chimney in games of Warhammer 40,000 can be found in White Dwarf issue 255. This is a complete 4 piece resin model (model shown for scale purposes only). Master Model by: Simon Egan.
Ref: TR-40K-S-024.
Tyranid Capillary towers are used by the Tyranids to aid the consumption of biomass from the planet. The full rules for using the Capillary Towers in games of Warhammer 40,000 can be found in White Dwarf issue 255. The set includes 3 one piece resin models (model shown for scale purposes only). Master Model by: Simon Egan.
Ref: TR-40K-S-010
Columns often feature heavily in Imperial cities, and can be used for building terrain pieces of Imperial architecture. Master Model by: Tony Cottrell.
Ref: BR-40K-A-005
Barbed wire is often used in defense to slow down approaching enemy infantry. Etched brass wire, over twelve feet in length. This wire is sharp, so use extreme care when removing it from the sprue and also when handling and modelling with it.
Ref: TR-40K-S-023
As well as providing troops protection this pillbox mounts a single autocannon two providing hard hitting long range firepower. This is a complete multi-part resin kit. Master model by Simon Harris.
Ref: TR-40K-S-004
Defense Line Set 2 consists of Defense Line Turret Emplacement (x1), Defense Line Straights (x2), Defense Line Ends (x2), Defense Line Destroyed (x1) and Defense Line Repaired (x1). The set reaches 33inches (830mm) in length and requires a Leman Russ turret to complete as shown.
Ref: TR-40K-S-018
Ammo dumps are used by the Imperial Guard as a storage for the various types of ammunition the infantry and armour require. This one piece resin model makes a great objective for your games of Warhammer 40,000. Master model by Simon Harris.
Ref: TR-40K-S-017
Fuel dumps store the fuel required for each Imperial vehicle operating in the area. This one piece resin model makes a great objective for your games of Warhammer 40,000. Master model by Simon Harris.
Ref: TR-40K-S-019
The tank emplacement provides excellent protection for the tank by allowing it to assume the hull down position. This one piece resin model makes a great objective for your games of Warhammer 40,000. Master model by Simon Harris.
Ref: TR-40K-S-012
Tank traps are used to block the movement of enemy ground based vehicles, slowing down any armoured assault. The kit contains two strips of battle damaged tank traps. Master Model by: Simon Harris
Ref: TR-40K-S-008
There are times when Imperial forces must make do with the materials at hand to construct barricades to help fortify areas to defend, and repel the enemy. Two barricades made from oil drums and creates. Master model by Simon Harris.
Ref: TR-40K-S-009
The Imperial command dugout provides Imperial commanders with communication and command equipment necessary to direct the Imperial forces under the commanders control. One piece model with moulded on Imperial Guard Equipment. Master model by Simon Harris.